In two days we will welcome the new year 2020! That means we are getting closer to the Spring Festival again. I believe many property owners are waiting for house inspection, because many people have bought new houses and decorated them and are preparing to move in? Well, we need to know some common sense when inspecting and accepting houses. What Zhongtao Jun will share with you today is the Tile Acceptance Standards. This is not something to be careless about. Let’s learn about it together!
More and more people are choosing ceramic tiles to decorate their homes. Ceramic tiles are favored by many consumers because of their bright colors and various ceramic tile styles for consumers to choose from. However, we in the market can also hear the news that someone did not pay attention to some details and did not understand some common sense when inspecting the house and was cheated. Therefore, we must know these common sense and skills.
1. What problems are often encountered when accepting ceramic tiles
1. Ceramic tiles will fall off in large areas, and the gaps between wall tiles are not always the same size and are staggered. If the bathroom tiles are uneven in height, water will accumulate in the room. The uneven placement will also affect the beauty of the home.
2. Ceramic tile acceptance time: It is best to accept the tiles one or two days after the installation of the kitchen and bathroom.
2. Ceramic tile acceptance process
1. See and touch
2. Beat the empty-checking drum
3. Instrument check verticality and slope
3. Tile acceptance criteria
1. Check whether it meets the design requirements, such as whether the variety and color of the ceramic tiles are consistent. There should be gaps between tiles but no more than 2mm
2. To test the flatness of floor tiles, you can use a 2-meter level to stick it closely to the side to be measured. The measured flatness error shall not exceed 2mm, and the height difference between adjacent tiles shall not exceed 0.5mm
3. When checking for hollowing of floor tiles, use a home inspection hammer to hit the four corners and center of the tiles.Point, the sound of the hollow drum is dull. When a tile is found to have two hollow points, it means it is unqualified.
4. When laying floor tiles, avoid contact with workers and avoid stepping on them.
4. Some precautions when accepting ceramic tiles
1. The waterproofing of bathroom and kitchen floors should be done
2. In order to avoid shortening the service life of wall tiles and ceramic tiles, do not mix wall and floor tiles
3. Ceramic tiles must be soaked in water before laying; gaps must be left between tiles and the gaps must be filled.
5. Maintenance skills when accepting ceramic tiles
After the tiles are laid, it is best to wait for three days before stepping on them. It is forbidden to polish the surface of the tiles, and the residues from the decoration construction must be dealt with in time. If it is polished tiles, it needs to be waxed regularly, about two to three months. If there are scratches on the tiles, you can apply toothpaste on the scratched areas and wipe them with a rag.
The above is an article about What are the acceptance criteria for ceramic tiles? Only by knowing it well can you not be afraid of being cheated. Just like taking exams in school, as long as you review well, you will not be afraid. What about the exam? Come on, come on, everyone! I am so confident, so I do the same during the acceptance process. That’s it for today’s content sharing. I hope it will be helpful to you! ! !
